View source for AccessControlledOffchainAggregator Reads

==='''AccessControlledOffchainAggregator''' ===
'''LINK / USD AccessControlledOffchainAggregator contract address: [https://etherscan.io/address/0xdfd03bfc3465107ce570a0397b247f546a42d0fa 0xDfd03BfC3465107Ce570a0397b247F546a42D0fA]'''

The Access Controlled Offchain Aggregator is the Aggregator contract that each Chainlink Node sends its observations/transmissions to.

This contract is read by the <code>EACAggregatorProxy</code>
===='''Read Calls'''====
This page contains all of the read calls you can make to the <code>AccessControlledOffchainAggregator</code> contracts.

If you'd like to check out the write calls, please check the [[AccessControlledOffchainAggregator_Writes]] page.
----

===== '''LINK''' =====
The LINK query will provide you with the contract address of the Chainlink token that the contract compensates the nodes in

* Example Query:
**<code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x1b6b6d23"}, "latest"]}' | jq -r .result</code>

*Example Response:
**<code>0x000000000000000000000000514910771af9ca656af840dff83e8264ecf986ca</code>
***(remove leading 24 <code>0</code>'s)
****LINK = <code>'''0x514910771af9ca656af840dff83e8264ecf986ca'''</code>
----
====='''billingAccessController'''=====
The <code>billingAccessController</code> is the address that has the permissions to modify the billing variables for the contract.  More details regarding the billing variables are available below in the <code>[[Test|getBilling]]</code> call 
*Example Query:
**<code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x996e8298"}, "latest"]}' | jq -r .result</code>

*Example Response:
**<code>0x0000000000000000000000009db83cef9f68b63989e4e82d65d549e7ff2acda9</code>
***(remove leading 24 <code>0</code>'s)
****billingAccessController = <code>'''0x9db83cef9f68b63989e4e82d65d549e7ff2acda9'''</code>
----
====='''checkEnabled''' =====
The <code>checkEnabled</code> call will return a boolean.  If true, then the read access of the aggregator contract is limited by the <code>AccessController</code> contract. 
*Example Query:
**<code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xdc7f0124"}, "latest"]}' | jq -r .result</code>

*Example Response:
**<code>0x0000000000000000000000000000000000000000000000000000000000000001</code>
***<code>0x0...1</code> is <code>true</code> and <code>0x0...0</code> is <code>false</code>
****checkEnabled = <code>'''true'''</code>
----

===== '''decimals''' =====
The <code>decimals</code> value tells the reader of the contract how many decimal places they need to adjust to get the proper value.

For example, if the <code>LINK / USD</code> price feed has a decimlas value of <code>8</code>, and the latest round shows a response of <code>726792272</code>, then we would shift the decimal 8 places to end with a value of <code>7.26792272</code>.

* Example Request:
** <code>DECIMALS=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x313ce567"}, "latest"]}' | jq -r .result) && echo "$((DECIMALS))"</code>
* Example Response:
** <code>8</code>
*** decimals = <code>'''8'''</code>

----

===== '''description''' =====
The <code>desctiption</code> of the Proxy is just a friendly name, in this case displaying LINK / USD*Example Query:

* Example Request:
** <code>DESCRIPTION=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x7284e416"}, "latest"]}' | jq -r .result) && echo $DESCRIPTION | xxd -r -p</code>

* Example Response:
** <code>LINK / USD</code>
*** description = <code>'''LINK / USD'''</code>

----

===== '''getAnswer''' =====
This call will provide you with the data for the round you have specified.

* Example Request:
** <code>GET_ANSWER=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xb5ab58dc000000000000000000000000000000000000000000000005000000000000347a"}, "latest"]}' | jq -r .result) && echo "$((GET_ANSWER))"</code>
* Example Response
** <code>726792272</code>
*** getAnswer = <code>'''726792272'''</code> or, after adjusting decimals, <code>'''7.26792272'''</code>

----

===== '''getBilling''' =====
The <code>getBilling</code> call will return a few values.  These values are intended to be updated semi regularly via the <code>setBilling</code> write call.  The values and a brief description are below

* Example Request
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x29937268"}, "latest"]}' | jq -r .result</code>

* Example Response:
** <code>0x0000000000000000000000000000000000000000000000000000000000000bb80000000000000000000000000000000000000000000000000000000000000064000000000000000000000000000000000000000000000000000000001082af400000000000000000000000000000000000000000000000000000000005b3f1e10000000000000000000000000000000000000000000000000000000022379f81</code>

* Converting the Response to Friendly Values
** maximumGasPrice -- the maximum gas price is the highest gas price that the contract will reimburse transaction fees.
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000000000bb8</code>
**** maximumGasPrice = <code>'''3000'''</code>
** reasonableGasPrice -- reasonable gas price is a gas price that the contract pays 100% of.
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000000000064</code>
**** reasonableGasPrice = <code>'''100'''</code>
** microLinkPerEth -- the ratio of LINK to ETH used for calculating the reimbursement of transaction fees.
*** <code>uint256</code>
*** <code>000000000000000000000000000000000000000000000000000000001082af40</code>
**** microLinkPerEth = <code>'''277000000'''</code>
** linkGweiPerObservation -- This is the amount of LINK (in gwei) paid to the node operators for submitting observations.
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000005b3f1e1</code>
**** linkGweiPerObservation = <code>'''95678945'''</code>
** linkGweiPerTransmission -- This is the amount of LINK (in gwei) paid to the Chainlink Node that successfully transmits the collection of observations to the aggregator contract.
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000022379f81</code>
**** linkGweiPerTransmission = <code>'''574070657'''</code>

----

===== '''getRoundData''' =====
Similar to the  <code>getAnswer</code> call, this call will get additional information from the round you have specified.

* Example Request
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x9a6fc8f50000000000000000000000000000000000000000000000050000000000003493"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x000000000000000000000000000000000000000000000005000000000000349300000000000000000000000000000000000000000000000000000000287aa86900000000000000000000000000000000000000000000000000000000628ce73900000000000000000000000000000000000000000000000000000000628ce7390000000000000000000000000000000000000000000000050000000000003493</code>
* Converting the Response to Friendly Values
** roundId
*** <code>uint80</code>
*** <code>0000000000000000000000000000000000000000000000050000000000003493</code>
**** roundId = <code>'''92233720368547771539'''</code>
** answer
*** <code>int256</code>
*** <code>00000000000000000000000000000000000000000000000000000000287aa869</code>
**** answer = <code>'''679127145'''</code>
** startedAt
*** <code>uint256</code>
*** <code>00000000000000000000000000000000000000000000000000000000628ce739</code>
**** startedAt = <code>'''1653401401'''</code>
** updatedAt
*** <code>uint256</code>
*** <code>00000000000000000000000000000000000000000000000000000000628ce739</code>
**** updatedAt = <code>'''1653401401'''</code>
** answeredInRound
*** <code>uint80</code>
*** <code>0000000000000000000000000000000000000000000000050000000000003493</code>
**** answeredInRound = <code>'''92233720368547771539'''</code>

----

===== '''getTimestamp''' =====
This <code>getTimestamp</code> call will provide you with the timestamp of the block containing the data from the round you have specified.

* Example Request:
** <code>GET_TIMESTAMP=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xb633620c000000000000000000000000000000000000000000000005000000000000347a"}, "latest"]}' | jq -r .result) && LOCALTIME=$((GET_TIMESTAMP)) && date -d @$LOCALTIME</code>
* Example Response
** <code>'''Mon 23 May 2022 03:47:51 PM CDT'''</code>

----

===== '''hasAccess''' =====
This call will let you know if the provided address has access to the specified call function.  For example, does Address A have permissions to request a new round?  The response is a bool.
*Example Query:
**We will check to see if the owner of the contract (<code>0x21f73D42Eb58Ba49dDB685dc29D3bF5c0f0373CA</code>)has permissions to request a new round (<code>98e5b12a</code>).
**<code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x6b14daf800000000000000000000000021f73d42eb58ba49ddb685dc29d3bf5c0f0373ca0000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000498e5b12a00000000000000000000000000000000000000000000000000000000"}, "latest"]}' | jq -r .result</code>

*Example Response:
**<code>0x0000000000000000000000000000000000000000000000000000000000000000</code>
***<code>0x0...1</code> is <code>true</code> and <code>0x0...0</code> is <code>false</code>
****hasAccess = <code>'''false'''</code>
----

===== '''latestAnswer''' =====
The <code>latestAnswer</code> call provides you with the value that was written to chain during the most recent completed round

* Example Request:
** <code>LATEST_ANSWER=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x50d25bcd"}, "latest"]}' | jq -r .result) && echo "$((LATEST_ANSWER))"</code>
* Example Response
** <code>701697722</code>
*** latestAnswer = <code>'''701697722'''</code> or, after adjusting decimals, <code>'''7.01697722'''</code>

----

===== '''latestConfigDetails''' =====
This call will provide you with the aggregator contract's 

* Example Request
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x81ff7048"}, "latest"]}' | jq -r .result</code>

* Example Response
** <code>0x00000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000be394f5fe8b4285e42eec4b0f9ab7add44b00e00000000000000000000000000000000</code>

* Converting the Response to Friendly Values
** configCount
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000000000002</code>
**** roundId = <code>'''2'''</code>
** blockNumber
*** <code>uint32</code>
*** <code>0000000000000000000000000000000000000000000000000000000000be394f</code>
**** answer = <code>'''12466511'''</code>
** configDigest
*** <code>bytes16</code>
*** <code>5fe8b4285e42eec4b0f9ab7add44b00e00000000000000000000000000000000</code>
**** configDigest = <code>'''0x5fe8b4285e42eec4b0f9ab7add44b00e'''</code>

----

===== '''latestRound''' =====
This call will provide you with the most recent completed round number.

* Example Request:
** <code>LATEST_ROUND=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x668a0f02"}, "latest"]}' | jq -r .result) && echo "$((LATEST_ROUND))"</code>
* Example Response
** <code>13462</code>
*** latestRound = <code>'''13462'''</code>

----

===== '''latestRoundData''' =====
This call is similar to <code>getRoundData</code>, but it will automatically get the round data for the most recently completed round.

* Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0x2c1d072e956AFFC0D435Cb7AC38EF18d24d9127c","data":"0xfeaf968c"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x00000000000000000000000000000000000000000000000500000000000034960000000000000000000000000000000000000000000000000000000029d30eba00000000000000000000000000000000000000000000000000000000628cfe6400000000000000000000000000000000000000000000000000000000628cfe640000000000000000000000000000000000000000000000050000000000003496</code>

* Converting the Response to Friendly Values
** roundId
*** <code>uint80</code>
*** <code>0000000000000000000000000000000000000000000000050000000000003496</code>
**** roundId = <code>'''92233720368547771542'''</code>
** answer
*** <code>int256</code> <code>0000000000000000000000000000000000000000000000000000000029d30eba</code>
**** answer = <code>'''701697722'''</code>
** startedAt
*** <code>uint256</code>
*** <code>00000000000000000000000000000000000000000000000000000000628cfe64</code>
**** startedAt = <code>'''1653407332'''</code>
** updatedAt
*** <code>uint256</code>
*** <code>00000000000000000000000000000000000000000000000000000000628cfe64</code>
**** updatedAt = <code>'''1653407332'''</code>
** answeredInRound
*** <code>uint80</code>
*** <code>0000000000000000000000000000000000000000000000050000000000003496</code>
**** answeredInRound = <code>'''92233720368547771542'''</code>

----

===== '''latestTimestamp''' =====
This call will provide you with the most timestamp (unix epoch format) of the most recently completed round.

* Example Request:
** <code>LATEST_TIMESTAMP=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"8205bf6a"}, "latest"]}' | jq -r .result) && LOCALTIME=$((LATEST_TIMESTAMP)) && date -d @$LOCALTIME</code>
* Example Response
** <code>'''Wed 31 Dec 1969 06:00:00 PM CST'''</code>

----

===== '''latestTransmissionDetails''' =====
This call will provide you with some detailed information regarding the most recently completed round. 

* Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xe5fe4577"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x5fe8b4285e42eec4b0f9ab7add44b00e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000002c2d200000000000000000000000000000000000000000000000000000000000000060000000000000000000000000000000000000000000000000000000029e4922600000000000000000000000000000000000000000000000000000000628e9818</code>

* Converting the Response to Friendly Values
** configDigest -- The digest of the most recently applied configuration.
*** <code>bytes16</code>
*** <code>5fe8b4285e42eec4b0f9ab7add44b00e00000000000000000000000000000000</code>
**** configDigest = <code>'''0x5fe8b4285e42eec4b0f9ab7add44b00e'''</code>
** epoch -- 
*** <code>uint32</code>
*** <code>000000000000000000000000000000000000000000000000000000000002c2d2</code>
**** epoch = <code>'''180926'''</code>
** round -- The round number of the most recently completed round.
*** <code>uint8</code>
*** <code>0000000000000000000000000000000000000000000000000000000000000006</code>
**** round = <code>'''6'''</code>
** latestAnswer -- The most recently transmitted value to the most recently completed round.
*** <code>int192</code>
*** <code>0000000000000000000000000000000000000000000000000000000029e49226</code>
**** latestAnswer = <code>'''702845478'''</code>
** latestTimestamp -- The timestamp of the block containing the most recently completed round
*** <code>uint64</code>
*** <code>00000000000000000000000000000000000000000000000000000000628e9818</code>
**** latestTimestamp = <code>'''1653512216'''</code>

----

===== '''linkAvailableForPayment''' =====
This will respond with the amount of LINK that is available in the contract to pay the node operators.  The value is in gwei

*Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xd09dc339"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x00000000000000000000000000000000000000000000013fdaf35c23ebc34a40</code>
*Converting the Response to Friendly Values
** linkAvailableForPayment
***<code>int256</code>
***<code>00000000000000000000000000000000000000000000013fdaf35c23ebc34a40</code>
****linkAvailableForPayment = <code>5900288414742305000000</code>
*****Adjust decimal 18 places
******linkAvailableForPayment = <code>'''5900.288414742305000000'''</code> 

----

===== '''maxAnswer''' =====
The <code>maxAnswer</code>is the largest value that the aggregator contract will accept as valid.
*Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x70da2f67"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x000000000000000000000000000000000000000000000000000000174876e800</code>
*Converting the Response to Friendly Values
** minAnswer
***<code>int192</code>
***<code>0x00000000000000000000000000000000000000000000000000000000000f4240</code>
****maxAnswer = <code>100000000000</code>
*****adjusting for 8 decimals as per [https://wiki.dextrac.com/index.php/AccessControlledOffchainAggregator_Reads#decimals decimals value]
******maxAnswer = <code>'''1000.00000000'''</code> 

----

===== '''minAnswer''' =====
The <code>minAnswer</code>is the smallest value that the aggregator contract will accept as valid.
*Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x22adbc78"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x00000000000000000000000000000000000000000000000000000000000f4240</code>
*Converting the Response to Friendly Values
** minAnswer
***<code>int192</code>
***<code>0x00000000000000000000000000000000000000000000000000000000000f4240</code>
****minAnswer = <code>1000000</code>
*****adjusting for 8 decimals as per [https://wiki.dextrac.com/index.php/AccessControlledOffchainAggregator_Reads#decimals decimals value]
******minAnswer = <code>'''0.01000000'''</code> 

----

===== '''oracleObservationCount''' =====
The response will provide you with the number of observations the specified Chainlink Node has made

*Example Request:
**We'll query the contract to see how many observations LinkPool's node (<code>0xcC29be4Ca92D4Ecc43C8451fBA94C200B83991f6</code>)has made
*** <code>OBSERV_COUNT=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0xe4902f82000000000000000000000000cc29be4ca92d4ecc43c8451fba94c200b83991f6"}, "latest"]}' | jq -r .result) && echo "$((OBSERV_COUNT))"</code>
* Example Response
** <code>9</code>
***oracleObservationCount = <code>'''9'''</code>

----

===== '''owedPayment''' =====
Querying this will provide you with the amount of LINK (in gwei) that is owed to the specified Chianlink Node
*Example Request:
**We'll query the contract to see how much LINK is owed to Fiews Chianlin knode.
*** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x0eafb25b000000000000000000000000218B5a7861dBf368D09A84E0dBfF6C6DDbf99DB8"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x0000000000000000000000000000000000000000000000000bf3477122e1da00</code>
*Converting the Response to Friendly Values
**owedPayment
***<code>uint256</code>
***<code>0000000000000000000000000000000000000000000000000bf3477122e1da00</code>
****owedPayment = <code>861110505000000000</code>
*****Adjust decimal 18 places
******owedPayment = <code>'''0.861110505000000000'''</code>

----

===== '''owner''' =====
This query will provide you with the address of the owner of the aggregator contract
*Example Request:
** <code>curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0xDfd03BfC3465107Ce570a0397b247F546a42D0fA","data":"0x8da5cb5b"}, "latest"]}' | jq -r .result</code>
* Example Response
** <code>0x00000000000000000000000021f73d42eb58ba49ddb685dc29d3bf5c0f0373ca</code>
***Remove the leading 24 <code>0</code>'s 
****owner = <code>'''0x21f73d42eb58ba49ddb685dc29d3bf5c0f0373ca'''</code>
----
===== '''requestAccessController''' =====
This call will provide you with the address of the AccessController contract

* Example Request:
** <code>curl</code>
* Example Response
** <code>response</code>
*** (remove leading 24 <code>0</code>'s)
****billingAccessController = <code>'''0x641B698aD1C6E503470520B0EeCb472c0589dfE6'''</code>

----

===== '''transmitters''' =====
This will provide you with the Chainlink Node accound addresses of each Chainlink Node Operator participating in the specified price feed

* Example Request:
** <code>curl</code>
* Example Response
** <code>response</code>
*** (remove leading 24 <code>0</code>'s)
****transmitters = <code>'''0x641B698aD1C6E503470520B0EeCb472c0589dfE6'''</code>''','''

----'''typeAndVersion'''

This query will provide you with the type and the release version of the aggregator.

* Example Request:
** <code>curl</code>
* Example Response
** <code>response</code>
*** 

----

===== '''validatorConfig''' =====
This will respond with the address of the validator contract and the gasLimit

* Example Request:
** <code>curl</code>
* Example Response
** <code>response</code>

----

===== '''version''' =====
This gets you the version of the contract you're querying.

* Example Request:
** <code>VERSION=$(curl -s -H "Content-Type: application/json" https://'''$YOUR_RPC_ENDPOINT''' -d '{"jsonrpc": "2.0", "id": 123, "method": "eth_call", "params":[{"from":null,"to":"0x2c1d072e956AFFC0D435Cb7AC38EF18d24d9127c","data":"0x54fd4d50"}, "latest"]}' | jq -r .result) && echo "$((VERSION))"</code>
* Example Response
** <code>4</code>
*** version = <code>'''4'''</code>